Train activity and homes Guide 21

Train counts for a HUD noise review: where to find them

A HUD noise review counts the trains on nearby rail lines by day and night, and each crossing record lists those counts. This guide shows where the counts come from and how to note them for the review file.

For housing developers, environmental reviewers and local housing staff.

Why do train counts matter in a HUD noise review?

HUD's noise rules are in 24 CFR Part 51, Subpart B. HUD treats a site with a day-night average sound level (DNL) above 65 decibels as noise-impacted, and a rail line near the site is one of the noise sources the review counts.

For a rail line, the review needs the number of trains, split between day and night.

Sources: 24 CFR Part 51, Subpart B: HUD noise rules (read 16 October 2026); HUD Exchange: noise abatement and control (read 16 October 2026).

What does HUD's DNL Calculator ask for?

HUD says its DNL Calculator works out noise from road and railway activity levels. For a rail line it asks for the number of trains in the day and at night, and whether trains sound their horns near the site.

Read the HUD user guide for the exact fields and for how the calculator defines day and night before you enter numbers. The FRA inventory keeps its own daytime and nighttime counts.

Sources: HUD Exchange: DNL Calculator (read 16 October 2026); HUD: DNL Calculator user guide (read 16 October 2026).

Where does HUD say to find train counts?

HUD's data sources page names two FRA tools. One is an FRA map that finds rail lines and crossing numbers near a site. The other is the FRA crossing inventory, which takes a crossing number and returns that crossing's train counts.

The same HUD page says the company that runs the rail line, when you can reach it, can give the number and timing of trains.

Sources: HUD: FRA railroad operations data sources, April 2020 (read 16 October 2026).

How can a crossing record help?

Each crossing record on the Atlas shows the DOT crossing number, the FRA inventory's daytime and nighttime through-train counts and the date of the record. Copy both counts and the date into your notes.

Switching movements are listed on their own. A missing count is not zero, so ask the railroad when a field is not reported.

Sources: FRA: crossing inventory reporting.

How does HUD read the result?

HUD calls an outdoor level of 65 decibels or less acceptable. A level above 65 and up to 75 decibels is normally unacceptable and needs added sound attenuation: 5 decibels up to 70, and 10 decibels above 70 up to 75. A level above 75 decibels is unacceptable.

HUD's goal for indoor levels is 45 decibels.

Sources: HUD Exchange: noise abatement and control (read 16 October 2026); 24 CFR Part 51, Subpart B: HUD noise rules (read 16 October 2026).

What should go in the review file?

Write down where each train count came from and its date, and keep the calculator printout with the environmental review file. When a record is old, ask the railroad for its current counts and note its answer.

Your next step

Find the crossings near the site.